Берлин Е. В. , Сейдман Л. А. , Коваль Н. Н.

Плазменная химико-термическая обработка поверхности стальных деталей: практическое пособие
 
 
ISBN: 978-5-94836-328-8
УДК: 621.78
ББК: 34.65
 
Москва: Техносфера, 2012
Number of pages: 464
Редактор: Иванов Ю.Ф.
 

No view is available.

Bibliographic description

Annotation
Книга представляет собой подробное справочное руководство по основам плазменной химико-термической обработки поверхности стальных деталей. В ней обобщены сведения о современном развитии этих технологических процессов, теоретические основы и методы их проведения. Детально проанализированы виды оборудования и принципы его конструирования для достижения высокой производительности, воспроизводимости и однородности обработки. Описаны варианты плазменной химико-термической обработки, отличающиеся видом элемента, насыщающего приповерхностные слои детали.
Книга рассчитана на специалистов, занимающихся исследованием и разработкой процессов упрочнения стальных деталей, используемых в устройствах различного назначения, совершенствованием технологии их производства и изготовлением специализированного оборудования для химико-термической обработки. Она также будет полезна в качестве учебного пособия студентам старших курсов и аспирантам соответствующих специализаций.

Contents

Список литературы

1. Берлин Е. В. Й Сейдман Л. А. Ионно-плазменные процессы в тонкопленочной технологии. Издательство «Техносфера», Москва, 2010, 528 стр.
2. O. Durst, C.S. Lin, C.S. Ke, H. Peng, Influence of plasma-nitriding and surface roughness on the wear and corrosion resistance of thin films (PVD/PECVD). – Surf. Coat. Technol. 146–147 (2001) 168–173.
3. Kuan-Wei Chen, Jen-Fin Lin. The study of adhesion and nanomechanical properties of DLC films deposited on tool steels. – Thin Solid Films 517 (2009) 4916–4920.
4. S.R. Hosseini, F. Ashrafizadeh. Accurate measurement and evaluation of the nitrogen depth profile in plasma nitrided iron. – Vacuum 83 (2009) 1174–1178.
5. J. Flis, M. Kuczynska, Effect of Low-Temperature Plasma Nitriding on Corrosion of 304L Stainless Steel in Sulfate and Chloride Solutions. J. Electrochem. Soc. 151 (2004) B573-B580.
6. C.A. Figueroa, F. Alvarez. On the hydrogen etching mechanism in plasma nitriding of metals. – Applied Surface Science 253 (2006) 1806–1809.
7. M. Azzi, M. Benkahoul, J.E. Klemberg-Sapieha, L. Martinu. Corrosion and mechanical properties of duplex-treated 301 stainless steel. – Surface and Coatings Technology 205 (2010) 1557–1563.
8. R.L.O. Basso, R.J. Candal, C.A. Figueroa, D. Wisnivesky, F. Alvarez. Influence of microstructure on the corrosion behavior of nitrocarburized AISI-H13 tool steel obtained by pulsed DC plasma. – Surface and Coatings Technology 203 (2009) 1293–1297.
9. M.K. Sharma, B.K. Saikia, S. Bujarbarua. Optical emission spectroscopy of DC pulsed plasmas used for steel nitriding. – Surface and Coatings Technology 203 (2008) 229–233.
10. S. Guruvenket, D. Li, J.E. Klemberg-Sapieha, L. Martinu, J. Szpunar. Mechanical and tribological properties of duplex treated TiN, nc-TiN/a-SiNx and nc-TiCN/a-SiCN coatings deposited on 410 low alloy stainless steel. – Surface and Coatings Technology 203 (2009) 2905–2911.
11. Peter Kaestner, Thorsten Michler, Hans Weidner, Kyong-Tschong Rie, Gunter Brauer. Plasma nitrided austenitic stainless steels for automotive hydrogen applications. – Surface and Coatings Technology 203 (2008) 897–900.
12. Yun-tao Xi, Dao-xin Liu, Dong Han. Improvement of corrosion and wear resistances of AISI-420 martensitic stainless steel using plasma nitriding at low temperature. – Surface and Coatings Technology 202 (2008) 2577–2583.
13. M. Mirjani, A. Shafyei, F. Ashrafizadeh. Plasma and gaseous nitrocarburizing of C60W steel for tribological applications. – Vacuum 83 (2009) 1043–1048.
14. E.A. Ochoa, D. Wisnivesky, T. Minea, M. Ganciu, C. Tauziede, P. Chapon, F. Alvarez. Microstructure and properties of the compound layer obtained by pulsed plasma nitriding in steel gears. – Surface and Coatings Technology 203 (2009) 1457–1461.
15. Wolfgang Tillmann, Evelina Vogli, Siavash Momeni. Mechanical and tribological properties of Ti/TiAlN duplex coatings on high and low alloy tool steels. – Vacuum 84 (2009) 387–392.
16. Savisalo T., Lewis D.B., Luo Q., Bolton M., Hovsepian P. Structure of duplex CrN/NbN coatings and their performance against corrosion and wearStructure of duplex CrN/NbN coatings and their performance against corrosion and wear. – Surface and Coatings Technology 202 (2008) 1661–1667.
17. V.H. Baggio-Scheid, A.J. Abdalla, G. de Vasconcelos. Effect of heating posttreatment on nitrided stainless steel. – Surface and Coatings Technology 201 (2006) 4058–4061.
18. F.M. El-Hossary, N.Z. Negm, S.M. Khalil, M. Raaif. Effect of continuous and cyclic Rf plasma processing time on titanium surface. – Applied Surface Science 239 (2005) 142–153.
19. Depla D., Haemers J., De Gryse R. Discharge voltage measurements during reactive sputtering of oxides. – Thin Solid Films 515 (2006) 468 – 471.
20. Depla D., and all. Target voltage behaviour during DC sputtering of silicon in an argon/nitrogen mixture. – Vacuum 66 (2002) 9–17.
21. Depla D. and Gryse R. De. Influence of oxygen addition on the target voltage during reactive sputtering of aluminium. – Plasma Sources Sci. Technol. 10 (2001) 547–555.
22. M. K. Hedayati, F. Mahboubi, T. Nickchi. Comparison of conventional and active screen plasma nitriding of hard chromium electroplated steel. – Vacuum 83 (2009) 1123–1128.
23. Gui-jiang Li, Qian Peng, Cong Li, Ying Wang, Jian Gao, Shu-yuan Chen, Jun Wang, Bao-luo Shen. Effect of DC plasma nitriding temperature on microstructure and drysliding wear properties of 316L stainless steel. – Surface and Coatings Technology 202 (2008) 2749–2754.
24. J.-D. Kamminga, P.F.A. Alkemade, G.C.A.M. Janssen. Scratch test analysis of coated and uncoated nitrided steel. – Surface and Coatings Technology 177–178 (2004) 284–288.
25. Guttler D., Abendroth B., Grotzschel R., Moller W., Depla D. Mechanisms of target poisoning during magnetron sputtering as investigated by real-time in situ analysis and collisional computer simulation. – Appl. Phys. Lett. 85(25) (2004) 6134–6136.
26. C.A. Figueroa, F. Alvarez. New pathways in plasma nitriding of metal alloys. – Surface and Coatings Technology 200 (2005) 498– 501.
27. Yong M. Kim, Jeon G. Han. Spectroscopic study for pulsed DC plasma nitriding of narrow deep holes. – Surface and Coatings Technology 171 (2003) 205–210.
28. T. Hirsch, T.G.R. Clarke, A. da Silva Rocha. An in-situ study of plasma nitriding. – Surface and Coatings Technology 201 (2007) 6380–6386.
29. J.-D. Kamminga, D. Doerwald, M. Schreurs, G.C.A.M. Janssen. Industrial feasibility of the nitrocoat process. – Surface and Coatings Technology 200 (2005) 1837–1841.
30. K.G. Kostov, M. Ueda, M. Lepiensky, P.C. Soares Jr., G.F. Gomes, M.M. Silva, H. Reuther. Surface modification of metal alloys by plasma immersion ion implantation and subsequent plasma nitriding. – Surface and Coatings Technology 186 (2004) 204–208.
31. N.Z. Negm. A study on rf plasma nitriding at a constant power in different H2–N2 mixtures at different temperatures. – Materials Science and Engineering B 129 (2006) 207–210.
32. J. Walkowicz. On the mechanisms of diode plasma nitriding in N2–H2 mixtures under DC-pulsed substrate biasing. – Surface and Coatings Technology 174–175 (2003) 1211–1219.
33. S. Mukherjee, J.Chakraborty, S. Gupta, P.M. Raole, P.I. John, K.R.M. Rao, I. Manna. Low- and high-energy plasma immersion ion implantation for modification of material surfaces. – Surface and Coatings Technology 156 (2002) 103–109.
34. S. D. Oliveira, A. P. Tschiptschin, C. E. Pinedo. Simultaneous plasma nitriding and ageing treatments of precipitation hardenable plastic mould steel. – Materials and Design 28 (2007) 1714–1718.
35. M. Keddam. Surface modification of the pure iron by the pulse plasma nitriding: Application of a kinetic model. – Materials Science and Engineering A 462 (2007) 169–173.
36. I. Jouanny, P. Weisbecker, V. Demange, M. Grafoute, O. Pena, E. Bauer-Grosse. Structural characterization of sputtered single-phase ? iron nitride coatings. – Thin Solid Films 518 (2010) 1883–1891.
37. Азотирование в пульсирующей плазме по технологии ЭЛЬТРОПУЛЬС (ELTROPULS) фирмы ЭЛЬТРО ГмбХ, Германия. http://eltromoskau.narod.ru/2/eltropuls.htm
38. D. Manova, T. Hoche, S. Mandl, H. Neumann. Development of CrN precipitates during the initial stages of PIII nitriding of stainless steel thin films. – Nuclear Instruments and Methods in Physics Research B 267 (2009) 1536–1539.
39. А.А. Андреев, В.М. Шулаев, Л.П. Саблев. Азотирование сталей в газовом дуговом разряде низкого давления. – ФИП PSE, т. 4, № 3–4, (2006) 191–197. http://www.pse.scpt.org.ua/en/jornal/3-4_06/9.pdf
40. C.A. Figueroa, S. Weber, T. Czerwiec, F. Alvarez. Oxygen, hydrogen, and deuterium effects on plasma nitriding of metal alloys. – Sripta Materialia 54 (2006) 1335.
41. SangYul Lee. Mechanical properties of TiNx/Cr1-xN thin films on plasma nitridingassisted AISI-H13 steel. – Surface and Coatings Technology 193 (2005) 55–59.
42. E.A. Ochoa, C.A. Figueroa, F. Alvarez. The influence of the ion current density on plasma nitriding process. – Surface and Coatings Technology 200 (2005) 2165–2169.
43. I. Popovic, V. Zlatanovic, A. Kunosic, M. Zlatanovic. Modeling of diode configuration glow discharge impedance connected to pulse power supply. – Surface and Coatings Technology 200 (2005) 1659–1663.
44. K. Wu, G.Q. Liu, L. Wang, B.F. Xu. Research on new rapid and deep plasma nitriding techniques of AISI-420 martensitic stainless steel. – Vacuum 84 (2010) 870–875.
45. E. I. Meletis. Intensified plasma-assisted processing: science and engineering. – Surface and Coatings Technology 149 (2002) 95–113.
46. M. Moradshahi, T. Tavakoli, S. Amiri, Sh. Shayeganmehr. Plasma nitriding of Al alloys by DC glow discharge. – Surface and Coatings Technology 201 (2006) 567–574.
47. Jerzy Robert Sobiecki, Tadeusz Wierzchon. Glow discharge assisted oxynitriding of the binary Ti6Al2Cr2Mo titanium alloy. – Vacuum 79 (2005) 203–208.
48. Y. Sun, E. Haruman. Effect of carbon addition on low-temperature plasma nitriding characteristics of austenitic stainless steel. – Vacuum 81 (2006) 114–119.
49. Liang Wang, Shijun Ji, Juncai Sun. Effect of nitriding time on the nitrided layer of AISI-304 austenitic stainless steel. – Surface and Coatings Technology 200 (2006) 5067 – 5070.
50. L.F. Zagonel, C.A. Figueroa, R. Droppa Jr., F. Alvarez. Influence of the process temperature on the steel microstructure and hardening in pulsed plasma nitriding. – Surface and Coatings Technology 201 (2006) 452–457.
51. M.K. Sharma, B.K. Saikia, A. Phukan, B. Ganguli. Plasma nitriding of austenitic stainless steel in N2 and N2–H2 dc pulsed discharge. – Surface and Coatings Technology 201 (2006) 2407–2413.
52. Liang Wang, Yang Li, Xuemin Wu. Plasma nitriding of low alloy steels at floating and cathodic potentials. – Applied Surface Science 254 (2008) 6595–6600.
53. M. Zlatanovic, N. Popovic, M. Mitric. Plasma processing in carbon containing atmosphere for possible treatment of wind turbine components. – Thin Solid Films 516 (2007) 228–232.
54. M. Zlatanovic, N. Popovic, Z. Bogdanov, S. Zlatanovic. Plasma post oxidation of nitrocarburized hot work steel samples. – Surface and Coatings Technology 177–178 (2004) 277–283.
55. R.R.M. de Sousa, F.O. de Araujo, J.C.P. Barbosa, K.J.B. Ribeiro, J.A.P. da Costa, C. Alves Jr. Nitriding using cathodic cage technique of austenitic stainless steel AISI-316 with addition of CH4. – Materials Science and Engineering A 487 (2008) 124–127.
56. J.-D. Kamminga, R. Hoy, G.C.A.M. Janssen, E. Lugscheider, M. Maes, First results on duplex coatings without intermediate mechanical treatment. Surf. Coat. Technol. 174–175 (2003) 671–676.
57. Д.П.Борисов, В.В. Гончарова, В.М. Кузьмиченко, В.М.Савостиков и С.М. Сергееев. Ионно-плазменное азотирование легированной стали с применением дугового плазмогенератора низкого давления. – Металловедение и термическая обработка металлов, 2006, № 12, с. 11–15.
58. Sh. Ahangarani, F. Mahboubi, A.R. Sabour. Effects of various nitriding parameters on active screen plasma nitriding behavior of a low-alloy steel. – Vacuum 80 (2006) 1032–1037.
59. C. Alves Jr, F.O. de Araujo, K.J.B. Ribeiro, J.A.P. da Costa, R.R.M. Sousa, R.S. de Sousa. Use of cathodic cage in plasma nitriding. – Surface and Coatings Technology 201 (2006) 2450–2454.
60. C. Zhao, C.X. Li, H. Dong, T. Bell. Study on the active screen plasma nitriding and its nitriding mechanism. – Surface and Coatings Technology 201 (2006) 2320–2325.
61. R.L. Liu, M.F. Yan. The microstructure and properties of 17-4PH martensitic precipitation hardening stainless steel modified by plasma nitrocarburizing. – Surface and Coatings Technology 204 (2010) 2251–2256.
62. Gui-jiang Li, Jun Wang, Cong Li, Qian Peng, Jian Gao, Bao-luo Shen. Microstructure and dry-sliding wear properties of DC plasma nitrided 17–4 PH stainless steel. – Nuclear Instruments and Methods in Physics Research B 266 (2008) 1964–1970.
63. Jen Fin Lin, Kuan Wei Chen, Chin Chung Wei, Chi-Fong Ai. The effects of differing nitrogen implantation conditions on penetration depth, mechanical properties, and tribological behavior of plasma-nitrided AISI-304 stainless steel. – Surface and Coatings Technology 197 (2005) 28–38.
64. Арзамасов Б.Н., Братухин А.Г., Елисеев Ю.С., Панайоти Т.А. Ионная химико-термическая обработка сплавов: Монография.– М.: Изд. МГТУ им Баумана, 1999. – 400 с.
65. Лахтин Ю.М., Коган Я.Д., Шпис Г., Бемер З. Теория и технология азотирования: Монография. – М.: «Металлургия», 1991.– 320 с.
66. Ю. С. Елисеев, Н. В. Абраимов, В. В. Крымов. Химико-термическая обработка и защитные покрытия в авиа-двигателестроении. М.: Высш. шк., 1999. – 525 с.
67. F. Qi, Y.X. Leng, N. Huang, B. Bai, P.Ch. Zhang. Surface modification of 17-4PH stainless steel by DC plasma nitriding and titanium nitride film duplex treatment. – Nuclear Instruments and Methods in Physics Research B 257 (2007) 416–419.
68. F.M. El-Hossary, N.Z. Negm, A.M. Abd El-Rahman, M. Hammad, C. Templier. Duplex treatment of AISI-304 austenitic stainless steel using rf nitriding and dc reactive magnetron sputtering of titanium. – Surface and Coatings Technology 202 (2008) 1392–1400.
69. Yang Li, Liang Wang, Lie Shen, Dandan Zhang, Chunhua Wang. Plasma nitriding of 42CrMo low alloy steels at anodic or cathodic potentials. – Surface and Coatings Technology 204 (2010) 2337–2342.
70. Mahfujur Rahman, Julfikar Haider, D.P. Dowling, P. Duggan, M.S.J. Hashmi. Investigation of mechanical properties of TiN+MoSx coating on plasma-nitrided substrate. – Surface and Coatings Technology 200 (2005) 1451–1457.
71. K.J.B. Ribeiro, R.R.M. de Sousa, F.O. de Araujo, R.A. de Brito, J.C.P. Barbosa, C. Alves Jr. Industrial application of AISI-4340 steels treated in cathodic cage plasma nitriding technique. – Materials Science and Engineering A 479 (2008) 142–147.
72. A.R.P. de Ataide, C. Alves Jr., V. Hajek, J.P. Leite. Effects during plasma nitriding of shaped materials of different sizes. – Surface and Coatings Technology 167 (2003) 52–58.
73. C. Alves Jr., J.A. Lima, V. Hajek, J.B. Marimon da Cunha, C.A. dos Santos. Effect of cooling rate on properties of plasma nitrided AISI-1010 steel. – Surface and Coatings Technology 201 (2007) 7566–7573.
74. M. Tsujikawa, N. Yamauchi, N. Ueda, T. Sone, Y. Hirose. Behavior of carbon in low temperature plasma nitriding layer of austenitic stainless steel. – Surface and Coatings Technology 193 (2005) 309– 313.
75. L.C. Gontijo, R. Machado, E.J. Miola, L.C. Casteletti, N.G. Alcantara, P.A.P. Nascente. Study of the S phase formed on plasma-nitrided AISI-316L stainless steel. – Materials Science and Engineering A 431 (2006) 315–321.
76. F.Mahboubi, M.Fattah. Duplex treatment of plasma nitriding and plasma oxidation of plain carbon steel. – Vacuum 79 (2005) 1–6.
77. Q. Luo, P.Eh. Hovsepian, D.B. Lewis, W.-D. Mqnz, Y.N. Kok, J. Cockrem, M. Bolton, A. Farinotti. Tribological properties of unbalanced magnetron sputtered nano-scale multilayer coatings TiAlN/VN and TiAlCrYN deposited on plasma nitrided steels. – Surface and Coatings Technology 193 (2005) 39– 45.
78. Y.K. Ko, S. Yoo, K.I. Moon, W.B. Lee, S.W. Kim, Y.Z. You. Plasma nitrosulfurizing techniques for low friction coefficient with H2S and C3H8 gas addition. – Surface and Coatings Technology 202 (2008) 5501–5504.
79. И.А. Рябчиков. Формирование ионных потоков из плазмы короткоимпульсными потенциалами смещения. Автореферат диссертации на соискание ученой степени кандидата технических наук. Томский политехнический университет. г. Томск, 2006. http://www.lib.tpu.ru/fulltext/a/2006/17.pdf
80. http://www.dpva.info/Guide/GuideMatherials/Metalls/AlloysNamesCorrespondance/Ste...
81. Santiago Corujeira Gallo, Hanshan Dong. On the fundamental mechanisms of active screen plasma nitriding. – Vacuum 84 (2010) 321–325.
82. J.L. He, K.C. Chen, A. Davison. Improvements in the understanding and application of duplex coating systems using arc plasma technology. – Surface and Coatings Technology 200 (2005) 1464–1471.
83. Gajendra Prasad Singh, J. Alphonsa, P.K. Barhai, P.A. Rayjada, P.M. Raole, S. Mukherjee. Effect of surface roughness on the properties of the layer formed on AISI-304 stainless steel after plasma nitriding. – Surface and Coatings Technology 200 (2006) 5807–5811.
84. L. Martinez Orellana, F.J. Perez, C. Gomez. The effect of nitrogen ion implantation on the corrosion behaviour of stainless steels in chloride media. – Surface and Coatings Technology 200 (2005) 1609–1615.
85. A. Anders. Metal plasmas for the fabrication of nanostructures. – J. Phys. D: Appl. Phys. 40 (2007) 2272–2284.
86. H. Paschke, M. Weber, P. Kaestner, G. Braeuer. Influence of different plasma nitriding treatments on the wear and crack behavior of forging tools evaluated by Rockwell indentation and scratch tests. – Surface and Coatings Technology 205 (2010) 1465–1469.
87. Xue-Chun Li, Li-Cheng Tian, You-Nian Wang. Sheath dynamics in a cylindrical PETfilm for plasma immersion ion implantation. – Vacuum 84 (2010) 1118–1122.
88. Xiubo Tian and Paul K. Chu. Electrochemical Corrosion Properties Of AISI-304 Steel Treated By Low-Temperature Plasma Immersion Ion Implantation. – Scripta mater. 43 (2000) 417–422.
89. C. Templier, J.C. Stinville, P. Villechaise, P.O. Renault, G. Abrasonis, J.P. Riviere, A. Martinavi??ius, M. Drouet. On lattice plane rotation and crystallographic structure of the expanded austenite in plasma nitrided AISI-316L steel. – Surface and Coatings Technology 204 (2010) 2551–2558.
90. Y. Sun. Depth-profiling electrochemical measurements of low temperature plasma carburised 316L stainless steel in 1 M H2SO4 solution. – Surface and Coatings Technology 204 (2010) 2789–2796.
91. M. Stoiber, J. Wagner, C. Mitterer, K. Gammer, H. Hutter, C. Lugmair, R. Kullmer. Plasma-assisted pre-treatment for PACVD TiN coatings on tool steel. – Surface and Coatings Technology 174–175 (2003) 687–693.
92. D. Manova, S. Mandl, H. Neumann, B. Rauschenbach. Wear behaviour of martensitic stainless steel after PIII surface treatment. – Surface and Coatings Technology 200 (2005) 137–140.
93. D. Manova, S. Mandl, H. Neumann, B. Rauschenbach. Influence of annealing conditions on ion nitriding of martensitic stainless steel. – Surface and Coatings Technology 200 (2006) 6563–6567.
94. D. Manova, G. Thorwarth, S. Mandl, H. Neumann, B. Stritzker, B. Rauschenbach. Variable lattice expansion in martensitic stainless steel after nitrogen ion implantation. – Nuclear Instruments and Methods in Physics Research B 242 (2006) 285–288.
95. S. Mandl, B. Fritzsche, D. Manova, D. Hirsch, H. Neumann, E. Richter, B. Rauschenbach. Wear reduction in AISI-630 martensitic stainless steel after energetic nitrogen ion implantation. – Surface and Coatings Technology 195 (2005) 258–263.
96. M. Esfandiari, H. Dong. The corrosion and corrosion–wear behaviour of plasma nitrided 17-4PH precipitation hardening stainless steel. – Surface and Coatings Technology 202 (2007) 466–478.
97. S. Mandl, F. Scholze, H. Neumann, B. Rauschenbach, Nitrogen diffusivity in expanded austenite. – Surface and Coatings Technology 174–175 (2003) 1191–1195.
98. D Manova, S Mandl and B Rauschenbach. Heat balance during plasma immersion ion implantation. – Plasma Sources Sci. Technol. 10 (2001) 423–429.
99. Y. Sun. Kinetics of low temperature plasma carburizing of austenitic stainless steels. – Journal of Materials Processing Technology 168 (2005) 189–194.
100. H. Dong, P.-Y. Qi, X.Y. Li, R.J. Llewellyn. Improving the erosion–corrosion resistance of AISI-316 austenitic stainless steel by low-temperature plasma surface alloying with N and C. – Materials Science and Engineering A 431 (2006) 137–145.
101. M.K. Lei, X.M. Zhu. Plasma-based low-energy ion implantation of austenitic stainless steel for improvement in wear and corrosion resistance. – Surface and Coatings Technology 193 (2005) 22–28.
102. L. Nosei, M. Avalos, B.J. Gomez, L. Nachez, J. Feugeas. Stability under temperature of expanded austenite developed on stainless steel AISI-316L by ion nitriding. – Thin Solid Films 468 (2004) 134–141.
103. Y. Ueda, N. Kanayama, K. Ichii, T. Oishi, H. Miyake. Metallurgical characteristics of the plasma (ion)-carburized layer of austenitic stainless steel SUS316L. – Surface and Coatings Technology 193 (2005) 50–54.
104. M. Tsujikawa, S. Noguchi, N. Yamauchi, N. Ueda, T. Sone. Effect of molybdenum on hardness of low-temperature plasma carburized austenitic stainless steel. – Surface and Coatings Technology 201 (2007) 5102–5107.
105. J.P. Riviere, P. Meheust, J.P. Villain, C. Templier, M. Cahoreau, G. Abrasonis, L. Pranevicius. High current density nitrogen implantation of an austenitic stainless steel. – Surface and Coatings Technology 158–159 (2002) 99–104.
106. J.P. Riviere, P. Meheust, J.P. Villain. Wear resistance after low-energy high-flux nitrogen implantation of AISI-304L stainless steel. – Surface and Coatings Technology 158–159 (2002) 647–652.
107. J.C. Stinville, P. Villechaise, C. Templier, J.P. Riviere, M. Drouet. Plasma nitriding of 316L austenitic stainless steel: Experimental investigation of fatigue life and surface evolution. – Surface and Coatings Technology 204 (2010) 1947–1951.
108. F. Borgioli, A. Fossati, E. Galvanetto, T. Bacci. Glow-discharge nitriding of AISI-316L austenitic stainless steel: influence of treatment temperature. – Surface and Coatings Technology 200 (2005) 2474–2480.
109. K.S. Suraj, P. Bharathi, V. Prahlad, S. Mukherjee. Near cathode optical emission spectroscopy in N2–H2 glow discharge plasma. – Surface and Coatings Technology 202 (2007) 301–309.
110. Saeid Amiri, Masoud Moradshahi. Influence of different layer microstructures induced by different gas compositions on corrosion behavior of plasma nitrided stainless steel. – Surface and Coatings Technology 201 (2007) 7375–7381.
111. В.С. Багоцкий. Основы электрохимии. – М.: «Химия», 1988. 400 с. 112. J.N. Feugeas, B.J. Gomez, G. Sanchez, J. Ferron, A. Craievich. Time evolution of Cr and N on AISI-304 steel surface during pulsed plasma ion nitriding. – Thin Solid Films 424 (2003) 130–138.
113. SRIM (The Stopping and Range of Ions in Matter). (http://www.srim.org/).
114. Joseph Buhagiar, Xiaoying Li, Hanshan Dong. Formation and microstructural characterisation of S-phase layers in Ni-free austenitic stainless steels by low-temperature plasma surface alloying. – Surface and Coatings Technology 204 (2009) 330–335.
115. H. Dong, M. Esfandiari, X.Y. Li. On the microstructure and phase identification of plasma nitrided 17-4PH precipitation hardening stainless steel. – Surface and Coatings Technology 202 (2008) 2969–2975.
116. M. Tsujikawa,T, D. Yoshida, N. Yamauchi, N. Ueda, T. Sone, S. Tanaka. Surface material design of 316 stainless steel by combination of low temperature carburizing and nitriding. – Surface and Coatings Technology 200 (2005) 507– 511.
117. T. Czerwiec, H. He, S. Weber, C. Dong, H. Michel. On the occurrence of dual diffusion layers during plasma-assisted nitriding of austenitic stainless steel. – Surface and Coatings Technology 200 (2006) 5289–5295.
118. F. Ernst, Y. Cao, G.M. Michal, A.H. Heuer. Carbide precipitation in austenitic stainless steel carburized at low temperature. – Acta Materialia 55 (2007) 1895–1906.
119. Carlos E. Pinedo, Waldemar A. Monteiro. On the kinetics of plasma nitriding a martensitic stainless steel type AISI-420. – Surface and Coatings Technology 179 (2004) 119–123.
120. J. Baranowska. Characteristic of the nitride layers on the stainless steel at low temperature. – Surface and Coatings Technology 180–181 (2004) 145–149.
121. Jolanta Baranowska, Bozena Arnold. Corrosion resistance of nitrided layers on austenitic steel. – Surface and Coatings Technology 200 (2006) 6623–6628.
122. Hong-Hua Ge, Guo-Ding Zhou, Wen-Quan Wu. Passivation model of 316 stainless steel in simulated cooling water and the effect of sulfide on the passive film. – Applied Surface Science 211 (2003) 321–334.
123. D. Manova, J. Lutz, S. Mandl. Sputtering effects during plasma immersion ion implantation of metals. – Surface and Coatings Technology 204 (2010) 2875–2880.
124. D. Manova, J.W. Gerlach, F. Scholze, S. Mandl, H. Neumann. Nitriding of austenitic stainless steel by pulsed low energy ion implantation. – Surface and Coatings Technology 204 (2010) 2919–2922.
125. Chang-Zi Chen, Qiang Li, Yong-Xiang Leng, J.Y. Chen, Peng-Cheng Zhang, Bin Bai, Nan Huang. Improved hardness and corrosion resistance of iron by Ti/TiN multilayer coating and plasma nitriding duplex treatment. – Surface and Coatings Technology 204 (2010) 3082–3086.
126. F.A.P. Fernandes, S.C. Heck, R.G. Pereira, C.A. Picon, P.A.P. Nascente, L.C. Casteletti. Ion nitriding of a superaustenitic stainless steel: Wear and corrosion characterization. – Surface and Coatings Technology 204 (2010) 3087–3090.
127. Sonia P. Bruhl, Raul Charadia, Silvia Simison, Diego G. Lamas, Amado Cabo. Corrosion behavior of martensitic and precipitation hardening stainless steels treated by plasma nitriding. – Surface and Coatings Technology 204 (2010) 3280–3286.
128. Xu Xiaolei, Wang Liang, Yu Zhiwei, Hei Zukun. A comparative study on microstructure of the plasma-nitrided layers on austenitic stainless steel and pure Fe. – Surface and Coatings Technology 192 (2005) 220–224.
129. R. Wei, T. Booker, C. Rincon, and J. Arps. Metal Plasma Immersion Ion Implantation and Deposition (MPIII and D) using a Newly Developed Plasma Source. – Society of Vacuum Coaters, 47th Annual Technical Conference Proceedings (2004) 523.
130. C.E. Foerster, A. Assmann, S.L.R. da Silva, F.C. Nascimento, C.M. Lepienski, J.L. Guimaraes, A.L. Chinelatto. AISI-304 nitrocarburized at low temperature: Mechanical and tribological. – Surface and Coatings Technology 204 (2010) 3004–3008.
131. Lie Shen, Liang Wang, Yizuo Wang, Chunhua Wang. Plasma nitriding of AISI-304 austenitic stainless steel with pre-shot peening. – Surface and Coatings Technology 204 (2010) 3222–3227.
132. C. Muratore, S.G. Walton, D. Leonhardt, R.F. Fernsler, and R.A. Meger. Materials Processing in Electron Beam-Generated Plasmas. – Society of Vacuum Coaters, 47th Annual Technical Conference Proceedings (2004) 412.
133. S.G. Walton, D. Leonhardt, C. Muratore, D.D. Blackwell, R.F. Fernsler, and R.A. Meger. Ion Flux Measurements in Electron Beam-Generated Plasmas. – 45th Annual Technical Conference Proceedings of the Society of Vacuum Coaters, (2002) 378.
134. D. Leonhardt, M.M. Balkey, R.F. Fernsler, R.A. Meger, and D.P. Murphy. Plasma Processing System Based on Electron Beam Ionization. – 45th Annual Technical Conference Proceedings of the Society of Vacuum Coaters, (2002) 354.
135. S.G. Walton, D. Leonhardt, R.F. Fernsler, and R.A. Meger. Characterizations of Electron Beam-Generated Plasmas. – 46th Annual Technical Conference Proceedings of the Society of Vacuum Coaters, (2003) 447.
136. Fan-Shiong Chen, Chih-Neng Chang. Effect of CH4 addition on plasma nitrocarburizing of austenitic stainless steel. – Surface and Coatings Technology 173 (2003) 9–18.
137. S.D. de Souza, M. Kapp, M. Olzon-Dionysio, M. Campos. Influence of gas nitriding pressure on the surface properties of ASTM F138 stainless steel. – Surface and Coatings Technology 204 (2010) 2976–2980.
138. M. Olzon-Dionysio, M. Campos, M. Kapp, S. de Souza, S.D. de Souza. Influences of plasma nitriding edge effect on properties of 316 L stainless steel. – Surface and Coatings Technology 204 (2010) 3623–3628.
139. J.-D. Kamminga, R. Hoy, P. van Essen, D. Doerwald, M. Schreurs and G.C.A.M. Janssen. Science and Application of Duplex Coatings. – 48th Annual Technical Conference Proceedings of the Society of Vacuum Coaters, (2005) 566.
140. Y. Sun, E. Haruman. Influence of processing conditions on structural characteristics of hybrid plasma surface alloyed austenitic stainless steel. – Surf. Coat. Technol. 202 (2008) 4069–4075.
141. Y. Sun, Mater. Hybrid plasma surface alloying of austenitic stainless steels with nitrogen and carbon. – Sci. Eng. A 404 (2005) 124–129.
142. A.M. Abd El-Rahman, F.M. El-Hossary, T. Fitz, N.Z. Negm, F. Prokert, M.T. Pham, E. Richter, W. Moeller. Effect of N2 to C2H2 ratio on r.f. plasma surface treatment of austenitic stainless steel. – Surf. Coat. Technol. 183 (2004) 268–274.
143. F.C. Nascimento, C.M. Lepienski, C.E. Foerster, A. Assmann, S.L.R. da Silva, C.J. de M. Siqueira, A.L. Chinelatto. Structural, mechanical, and tribological properties of AISI-304 and AISI-316L steels submitted to nitrogen–carbon glow discharge. – J. Mater. Sci. 44 (2009) 1045–1053.
144. M. Olzon-Dionysio, S.D. de Souza, R.L.O. Basso, S. de Souza. Application of Mossbauer spectroscopy to the study of corrosion resistance in NaCl solution of plasma nitrided AISI-316L stainless steel. – Surf. Coat. Technol. 202 (2008) 3607–3614.
145. P. Corengia, G. Ybarra, C. Moina. Microstructural and topographical studies of DCpulsed plasma nitrided AISI-4140 low-alloy steel. – Surf. Coat. Technol. 200 (2005) 2391–2397.
146. Y.M. Liu, L.H. Li, M. Xu, X. Cai, Q.L. Chen, Y.W. Hua, P.K. Chu. Effects of nitrogen ion implantation and implantation energy on surface properties and adhesion strength of TiN films deposited on aluminum by magnetron sputtering. – Mater. Sci. Eng. A 415 (2006) 140–144.
147. K.H. Lo, C.H. Shek, J.K.L. Lai. Recent developments in stainless steels. – Mater. Sci.Eng. R 65 (2009) 39–104.
148. C. Kwietniewski, W. Fontana, C. Moraes, A.daS Rocha, T. Hirsch, A. Reguly. Nitrided layer embrittlement due to edge effect on duplex treated AISI-M2 high-speed steel. – Surf. Coat. Technol. 179 (2004) 27–32.
149. Macak E. B., Munz W.-D. and Rodenburg J. M. Plasma–surface interaction at sharp edges and corners during ion-assisted physical vapor deposition. Part I: Edge-related effects and their influence on coating morphology and composition. – J. Appl. Phys. 94(5) (2003) 2829–2836.
150. G. Abrasonis, J.P. Riviere, C. Templier, A. Declemy, L. Pranevicius, X. Milhet. Ion beam nitriding of single and polycrystalline austenitic stainless steel. – J. Appl. Phys. 97 (2005) 083531 1–10.
151. Avner Brokman and Floyd R. Tuler. A study of the mechanisms of ion nitriding by the application of a magnetic field. – J. Appl. Phys. 52(1) (1981) 468–471.
152. W. P. Tong, N. R. Tao, Z. B. Wang, J. Lu, K. Lu. Nitriding Iron at Lower Temperatures. – Science 299 (2003) 686–688.
153. M.P. Fewell, J.M. Priest. High-order diffractometry of expanded austenite using synchrotron radiation. – Surf. Coat. Technol. 202 (2008) 1802–1815.
154. L. L. G. da Silva. M. Ueda. C. B. Mello. E. N. Codaro. C. M. Lepienski. Effects of the high temperature plasma immersion ion implantation (PIII) of nitrogen in AISI-H13 steel. – J. Mater. Sci. 43 (2008) 5989–5997.
155. T.S. Wang, B. Lu, M. Zhang, R.J. Hou, F.C. Zhang. Nanocrystallization and martensite formation in the surface layer of medium-manganese austenitic wear-resistant steel caused by shot peening. – Materials Science and Engineering A 458 (2007) 249–252.
156. A. Akbari, R. Mohammadzadeh, C. Templier, J.P. Riviere. Effect of the initial microstructure on the plasma nitriding behavior of AISI-M2 high speed steel. – Surface and Coatings Technology 204 (2010) 4114–4120.
157. J. Garcia Molleja, L. Nosei, J. Ferron, E. Bemporad, J. Lesage, D. Chicot, J. Feugeas. Characterization of expanded austenite developed on AISI-316L stainless steel by plasma carburization. – Surface and Coatings Technology 204 (2010) 3750–3759.
158. Linda Gil, Sonia Bruhl, Lorena Jimenez, Ovidio Leon, Rafael Guevara, Mariana H. Staia. Corrosion performance of the plasma nitrided 316L stainless steel. – Surface and Coatings Technology 201 (2006) 4424–4429.
159. C.X. Li, T. Bell. Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel. – Corrosion Science 46 (2004) 1527–1547.
160. R.M. Oliveira, J.A.N. Goncalves, M. Ueda, J.O. Rossi, P.N. Rizzo. A new hightemperature plasma immersion ion implantation system with electron heating. – Surface and Coatings Technology 204 (2010) 3009–3012.
161. C.R.B. Miranda, M. Ueda, M.R. Baldan, A.F. Beloto, N.G. Ferreira. Treatment of nanocrystalline diamond films by nitrogen implantation using PIII processing. – Surface and Coatings Technology 204 (2010) 3034–3038.
162. F. Borgioli, A. Fossati, E. Galvanetto, T. Bacci, G. Pradelli. Glow discharge nitriding of AISI-316L austenitic stainless steel: Influence of treatment pressure. – Surface and Coatings Technology 200 (2006) 5505–5513.
163. M. Ueda, M.M. Silva, C.M. Lepienski, P.C. Soares Jr., J.A.N. Goncalves, H. Reuther. High temperature plasma immersion ion implantation of Ti6Al4V. – Surface and Coatings Technology 201 (2007) 4953–4956.
164. V. Fouquet, L. Pichon, A. Straboni, M. Drouet. Nitridation of Ti6Al4V by PBII: study of the nitrogen diffusion and of the nitride growth mechanism. – Surface and Coatings Technology 186 (2004) 34–39.
165. L. Trabzon, M.C. Igdil. On the materials properties of thin film plasma-nitrided austenitic stainless steel. – Surface and Coatings Technology 200 (2006) 4195–4200.
166. V. Singh, K. Marchev, C.V. Cooper, E.I. Meletis. Intensified plasma-assisted nitriding of AISI-316L stainless steel. – Surface and Coatings Technology 160 (2002) 249–258.
167. Y. Sun. Enhancement in corrosion resistance of austenitic stainless steels by surface alloying with nitrogen and carbon. – Materials Letters 59 (2005) 3410–3413.
168. Zhao Cheng, C.X. Li, H. Dong, T. Bell. Low temperature plasma nitrocarburising of AISI-316 austenitic stainless steel. – Surface and Coatings Technology 191 (2005) 195–200.
169. M. Esfandiari, H. Dong. Improving the surface properties of A286 precipitationhardening stainless steel by low-temperature plasma nitriding. – Surface and Coatings Technology 201 (2007) 6189–6196.
170. A. Fossati, F. Borgioli, E. Galvanetto, T. Bacci. Glow-discharge nitriding of AISI-316L austenitic stainless steel: influence of treatment time. – Surface and Coatings Technology 200 (2006) 3511–3517.
171. M. Keddam. Characterization of the nitrided layers of XC38 carbon steel obtained by R.F. plasma nitriding. – Applied Surface Science 254 (2008) 2276–2280.
172. G. Abrasonis, J.P. Riviere, C. Templier, A. Declemy, S. Muzard, L. Pranevicius. A comparative study of ion beam nitriding of single-crystalline and polycrystalline 316L austenitic stainless steel. – Surface and Coatings Technology 196 (2005) 262–266.
173. Stephan Mandl. Nitriding of Stainless Steel: PIII or Low Energy Nitriding. – Plasma Process. Polym. 4 (2007) 239–245.
174. Thierry Czerwiec, Huan He, Gregory Marcos, Tony Thiriet, Sylvain Weber, Henri Michel. Fundamental and Innovations in Plasma Assisted Diffusion of Nitrogen and Carbon in Austenitic Stainless Steels and Related Alloys. – Plasma Process. Polym. 6 (2009) 401–409.
175. Paul K. Chu. Recent developments and applications of plasma immersion ion implantation. – J. Vac. Sci. Technol. B 22(1) (2004) 289–296.
176. Wen Yue, Xiaocheng Gao, Yuandong Liu, Xuejie Sun, Chengbiao Wang, Jiajun Liu. Tribological properties of sulfurized-nitrided layer prepared by a two-step method. – Vacuum 85 (2011) 1011–1016.
177. A. Lacoste, T. Lagarde, S. Bechu, Y. Arnal and J. Pelletier. Multi-dipolar plasmas for uniform processing: physics, design and performance. – Plasma Sources Sci. Technol. 11 (2002) 407–412.
178. S. Mandl, D. Manova, B. Rauschenbach. Interplay of surface adsorption and preferential sputtering in metal plasma immersion ion implantation and deposition. – Nuclear Instruments and Methods in Physics Research B 206 (2003) 663–667.
179. Motoo Egawa, Yasushi Matsuda, Nobuhiro Ueda, Takumi Sone, Masato Tsujikawa, Kazuhiro Nakata. Effect of Cold Forming on Low-Temperature Plasma Nitriding and Carburizing Characteristics of Austenitic Stainless Steel. – Plasma Process. Polym. 6 (2009) S893–S896.
180. Sh. Ahangarani, A.R. Sabour, F. Mahboubi. Surface modification of 30CrNiMo8 lowalloy steel by active screen setup and conventional plasma nitriding methods. – Applied Surface Science 254 (2007) 1427–1435.
181. Winfried Grafen, Bernd Edenhofer. New developments in thermo-chemical diffusion processes. – Surface and Coatings Technology 200 (2005) 1830–1836.
182. Z. Wolarek, T. Zakroczymski. Hydrogen absorption in plasma-nitrided iron. – Acta Materialia 54 (2006) 1525–1532.
183. Z. Wolarek, T. Zakroczymski. Hydrogen transport in plasma nitrided iron. – Acta Materialia 52 (2004) 2637–2643.
184. E.J. Miola, S.D. de Souza, M. Olzon-Dionysio. Systematic study on influence of the nitriding parameters on pure iron superficial layer properties. – Surface and Coatings Technology 167 (2003) 33–40.
185. E. Skolek-Stefaniszyn, J. Kaminski, J. Sobczak, T. Wierzchon. Modifying the properties of AISI-316L steel by glow discharge assisted low-temperature nitriding and oxynitriding. – Vacuum 85 (2010) 164–169.
186. C. A. Figueroa, A. S. Ferlauto, and F. Alvarez. Identification of the mechanism-limiting nitrogen diffusion in metallic alloys by in situ photoemission electron spectroscopy. – J. Appl. Phys., 94(8) (2003) 5436.
187. E. J. Miola, S. D. de Souza, M. Olzon-Dionysio, D. Spinelli, and H. R. Rechenberg. Plasma Nitriding of Pure Iron at Several Temperatures. – Phys. Stat. Sol. (b) 231(2) (2002) 385–390.
188. Rodrigo L. O. Basso, Carlos A. Figueroa, Luiz F. Zagonel, Heloise O. Pastore, Daniel Wisnivesky, Fernando Alvarez. Effect of Carbon on the Compound Layer Properties of AISI-H13 Tool Steel in Pulsed Plasma Nitrocarburizing. – Plasma Process. Polym. 4 (2007) S728–S731.
189. Joseph Buhagiar, Linmao Qian, Hanshan Dong. Surface property enhancement of Nifree medical grade austenitic stainless steel by low-temperature plasma carburising. – Surface and Coatings Technology 205 (2010) 388–395.
190. Rogerio M. Oliveira, Mario Ueda, Ing H. Tan, Lilian Hoshida, Carina B. Mello. Enhanced Mechanical and Tribological Properties of AISI-304 Stainless Steel by Using a Hybrid Nitriding Process. – Plasma Process. Polym. 4 (2007) S655–S659.
191. A.M. Abd El-Rahman. An investigation on the microstructure, tribological and corrosion performance of AISI-321 stainless steel carbonitrided by RF plasma process. – Surface and Coatings Technology 205 (2010) 674–681.
192. Q. Zhang, Y.X. Leng, F. Qi, T. Tao, N. Huang. Mechanical and corrosive behavior of Ti/TiN multilayer films with different modulation periods. – Nuclear Instruments and Methods in Physics Research B 257 (2007) 411–415.
193. Carlos A. Figueroa, Sylvain Weber, Thierry Czerwiec, Fernando Alvarez. Oxygen Effects in Plasma Nitriding of Ferrous Alloys. – Plasma Process. Polym. 4 (2007) S732–S735.
194. Masato Tsujikawa, Shin-ichi Noguchi, Naohiko Yamauchi, Nobuhiro Ueda, Akira Okamoto, Takumi Sone, Kazuhiro Nakata. Acceleration of Carbon Diffusion by Molybdenum in Low-Temperature Plasma Carburizing of Austenitic Stainless Steel. – Plasma Process. Polym. 4 (2007) S752–S756.
195. Ronghua Wei, Raymond C. Benn, Clark V. Cooper. High Intensity Plasma Ion Nitriding of AerMet 100 Martensitic Steel. – Plasma Process. Polym. 4 (2007) S700–S706.
196. Evangelina De Las Heras, Daniel Gonzalez Santamaria, Alberto Garcia-Luis, Amado Cabo, Marta Brizuela, Gabriel Ybarra, Norma Mingolo, Sonia Bruhl, Pablo Corengia. Microstructure and Wear Behavior of DC-Pulsed Plasma Nitrided AISI-316L Austenitic Stainless Steel. – Plasma Process. Polym. 4 (2007) S741–S745.
197. M.F. Yan, R.L. Liu. Martensitic stainless steel modified by plasma nitrocarburizing at conventional temperature with and without rare earths addition. – Surface and Coatings Technology 205 (2010) 345–349.
198. Chahinez Saied, Abdelouahad Chala, Corinne Nouveau, Mohamed Abdou Djouadi, Lounis Chekour. – Determination of the Optimum Conditions for Ion Nitriding of 32CDV13 Low Alloy Steel. – Plasma Process. Polym. 4 (2007) S757–S760.
199. B.S. Saini, V.K. Gupta. Effect of WC/C PVD coating on fatigue behaviour of case carburized SAE8620 steel. – Surface and Coatings Technology 205 (2010) 511–518.
200. Y. Sun, T. Bell. Dry sliding wear resistance of low temperature plasma carburised austenitic stainless steel. – Wear 253 (2002) 689–693.
201. A. Vyas, Y.H. Lu, Y.G. Shen, Mechanical and tribological properties of multicomponent Ti–B–C–N thin films with varied C contents. – Surf. Coat. Technol. 204 (2010) 1528–1534.
202. C. Muratore, D. Leonhardt, S.G. Walton, D.D. Blackwell, R.F. Fernsler, R.A. Meger, Low-temperature nitriding of stainless steel in an electron beam generated plasma. – Surf. Coat. Technol. 191 (2005) 255–262.
203. Yanqiu Xia, Junhong Hu, Feng Zhou, Yimin Lin, Yulin Qiao, Tao Xu. Friction and wear behavior of plasma nitrided 1Cr18Ni9Ti austenitic stainless steel under lubrication condition . – Materials Science and Engineering A 402 (2005) 135–141.
204. T. Czerwiec, H. He, A. Saker, L. Tran-Hu, C. Dong, C. Frantz, H. Michel, Reactive magnetron sputtering as a way to improve the knowledge of metastable ГЦК nitrogen solid solutions formed during plasma assisted nitriding of Inconel 690. – Surf. Coat. Technol. 174–175 (2003) 131.
205. H. He, T. Czerwiec, C. Dong, H. Michel, Effect of grain orientation on the nitriding rate of a nickel base alloy studied by electron backscatter diffractionю – Surf. Coat. Technol. 163 (2003) 331–338.
206. F.M. El-Hossary, The influence of surface microcracks and temperature gradients on the rf plasma nitriding rate. – Surf. Coat. Technol. 150 (2002) 277–281.
207. A. Alsaran, M. Karakan, A. Celik, F. Bulbul, I . Efeoglu. Study on compound layer formed during plasma nitrocarburizing of AISI-5140 steel. – J. Mater. Science Letters. – 22 (2003) 1759–1761.
208. Ronghua Wei, Thomas Booker, Christopher Rincon, Jim Arps. High-intensity plasma ion nitriding of orthopedic materials Part I. Tribological study. – Surface and Coatings Technology 186 (2004) 305–313.
209. Bruce R. Lanning, Ronghua Wei. High intensity plasma ion nitriding of orthopedic materials Part II. Microstructural analysis. – Surface and Coatings Technology 186 (2004) 314–319.
210. C. A. Figueroa and F. Alvarez. In situ photoemission electron spectroscopy of plasmanitrided metal alloys. – J. Appl. Phys. 97 (2005) 103528 1–6.
211. A. Martinavi??ius, G. Abrasonis, W. Moller, C. Templier, J. P. Riviere, A. Declemy, and Y. Chumlyakov. Anisotropic ion-enhanced diffusion during ion nitriding of single crystalline austenitic stainless steel. – J. Appl. Phys. 105 (2009) 093502 1–7.
212. J. Baranowska, S.E. Franklin. Characterization of gas-nitrided austenitic steel with an amorphous/nanocrystalline top layer. – Wear 264 (2008) 899–903.
213. F.M. El-Hossary, N.Z. Negm, A.M. Abd El-Rahman, M. Hammad. Duplex treatment of 304 AISI-stainless steel using rf plasma nitriding and carbonitriding. – Materials Science and Engineering C 29 (2009) 1167–1173.
214. A.M. Abd El-Rahman, N.Z. Negm, F. Prokert, F.M. El-Hossary, E. Richter, W. Moller. Depth-related microstructure of rf plasma nitrocarburized austenitic stainless steel. – Surface and Coatings Technology 191 (2005) 140–147.
215. P. Kochmanski, J. Nowacki. Influence of initial heat treatment of 17–4 PH stainless steel on gas nitriding kinetics. – Surface and Coatings Technology 202 (2008) 4834–4838.
216. A. Fossati, F. Borgioli, E. Galvanetto, T. Bacci. Corrosion resistance properties of glowdischarge nitrided AISI-316L austenitic stainless steel in NaCl solutions. – Corrosion Science 48 (2006) 1513–1527.
217. C.X. Li, T. Bell. Corrosion properties of plasma nitrided AISI-410 martensitic stainless steel in 3.5 % NaCl and 1 % HCl aqueous solutions. – Corros. Sci. 48 (2006) 2036–2049.
218. J. Feugeas, B. Gomez, A. Craievich. Ion nitriding of stainless steels. Real time surface characterization by synchrotron X-ray diffraction. – Surface and Coatings Technology 154 (2002) 167–175.
219. P. Corengia, G. Ybarra, C. Moina, A. Cabo, E. Broitman. Microstructure and corrosion behaviour of DC-pulsed plasma nitrided AISI-410 martensitic stainless steel. – Surface and Coatings Technology 187 (2004) 63–69.
220. Y. Sun. Response of cast austenitic stainless steel to low temperature plasma carburizing. – Materials and Design 30 (2009) 1377–1380.
221. Bore Jegdic, Dragutin M. Drazic, Jovan P. Popic. Open circuit potentials of metallic chromium and austenitic 304 stainless steel in aqueous sulphuric acid solution and the influence of chloride ions on them. – Corrosion Science 50 (2008) 1235–1244.
222. Ranjana Saha, William D. Nix. Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. – Acta Materialia 50 (2002) 23–38.
223. C.E. Foerster, J.F.P. Souza, C.A. Silva, M. Ueda, N.K. Kuromoto, F.C. Serbena, S.L.R. Silva, C.M. Lepienski. Effect of cathodic hydrogenation on the mechanical properties of AISI-304 stainless steel nitrided by ion implantation, glow discharge and plasma immersion ion implantation. – Nuclear Instruments and Methods in Physics Research B 257 (2007) 727–731.
224. C.M. Lepienski, F.C. Nascimento, C.E. Foerster, S.L.R. da Silva, C.J. de M. Siqueira, C. Alves Jr. Glow discharge nitriding in AISI-304 at different nitrogen–hydrogen atmospheres: Structural, mechanical and tribological properties. – Materials Science and Engineering A 489 (2008) 201–206.
225. C.E. Foerster, F.C. Serbena, S.L.R. da Silva, C.M. Lepienski, C.J. de M. Siqueira, M. Ueda. Mechanical and tribological properties of AISI-304 stainless steel nitrided by glow discharge compared to ion implantation and plasma immersion ion implantation. – Nuclear Instruments and Methods in Physics Research B 257 (2007) 732–736.
226. Xian-Hua Cheng, Chao-Ying Xie. Effect of rare earth elements on the erosion resistance of nitrided 40Cr steel. – Wear 254 (2003) 415–420.
227. H.R. Abedi, M. Salehi, M. Yazdkhasti, A. Hemmasian-E. Effect of high temperature post-oxidizing on tribological and corrosion behavior of plasma nitrided AISI-316 austenitic stainless steel. – Vacuum 85 (2010) 443–447.
228. C. A. Figueroa and F. Alvarez. Hydrogen etching mechanism in nitrogen implanted iron alloys studied with in situ photoemission electron spectroscopy. – J. Vac. Sci. Technol. A 23(5) (2005) L9-L12.
229. Kou Hyun Lee, Ki Suk Nam, Pyung Woo Shin, Deuk Yong Lee, Yo-Seung Song. Effect of post-oxidizing time on corrosion properties of plasma nitrocarburized AISI-1020 steel. – Materials Letters 57 (2003) 2060–2065.
230. H. Ferkel, Y. Estrin, C. Blawert, R.Z. Valiev. RF nitriding of severely deformed Armco iron and St2K50. – Surface and Coatings Technology 173–174 (2003) 1164–1170.
231. Alsaran A, Altun H, Karakan M, Celik A. Effect of post-oxidizing on tribological and corrosion behaviour of plasma nitrided AISI-5140 steel. – Surf Coat Technol 176 (2004) 344–348.
232. H.R. Abedi, M. Salehi, M. Yazdkhasti. Novel plasma nitriding–oxidizing duplex treatment of AISI-316 austenitic stainless steel. – Mater Lett 64 (2010) 698–701.
233. Insup Lee. Post-oxidizing treatments of the compound layer on the AISI-4135 steel produced by plasma nitrocarburizing. – Surface and Coatings Technology 188–189 (2004) 669–674.
234. C.X. Li, T. Bell. Sliding wear properties of active screen plasma nitrided 316 austenitic stainless steel. – Wear 256 (2004) 1144–1152.
235. F. Borgioli, E. Galvanetto, A. Fossati, T. Bacci. Glow-discharge nitriding and postoxidising treatments of AISI-H11 steel. – Surface and Coatings Technology 162 (2002) 61–66.
236. M. Keddam, M.E. Djeghlal, L. Barrallier. A diffusion model for simulation of bilayer growth (?/?') of nitrided pure iron. – Materials Science and Engineering A 378 (2004) 475–478.
237. S. Shang, A.J. Bottger. Application of the cluster variation method to ?-Fe2N1-z and ?-Fe2N: ordering of interstitial atoms. – Acta Materialia 51 (2003) 3597–3606.
238. M. Keddam, M.E. Djeghlal, L. Barrallier. A diffusion model for simulation of bilayer growth (?/?') of nitrided pure iron. – Materials Science and Engineering A 378 (2004) 475–478.
239. M. Keddam, M.E. Djeghlal, L. Barrallier, E. Salhi. Computer simulation of nitrided layers growth for pure iron. – Computational Materials Science 29 (2004) 43–48.
240. M. Keddam, M.E. Djeghlal, L. Barrallier. A simple diffusion model for the growth kinetics of ??' iron nitride on the pure iron substrate. – Applied Surface Science 242 (2005) 369–374.
241. M. G. Krukovich. Simulation of the nitriding process. – Metal Science and Heat Treatment 46(1–2) (2004) 25–31.
242. G. Abrasonis, P. Meheust, J.P. Riviere, L. Pranevicius, C. Templier. Tentative modelling of nitriding with ion beams, the role of surface effects. – Surface and Coatings Technology 151–152 (2002) 344–348.
243. Jerzy Ratajski, Tomasz Suszko. Modelling of the nitriding process. – Journal of materials processing technology 195 (2008) 212–217.
244. Mufu Yan, Jihong Yan and T Bell. Numerical simulation of nitrided layer growth and nitrogen distribution in ?-Fe2-3N, ?'-Fe4N and ?-Fe during pulse plasma nitriding of pure iron. – Modelling Simul. Mater. Sci. Eng. 8 (2000) 491–496.
245. T. Michler. Influence of plasma nitriding on hydrogen environment embrittlement of 1.4301 austenitic stainless steel. – Surf. Coat. Technol. 202 (2008) 1688–1695
246. N. Mingolo, A.P. Tschiptschin, C.E. Pinedo. On the formation of expanded austenite during plasma nitriding of an AISI-316L austenitic stainless steel. – Surface and Coatings Technology 201 (2006) 4215–4218.
247. R.M. Oliveira, J.A.N. Goncalves, M. Ueda, S. Oswald, S.C. Baldissera. Improved corrosion resistance of tool steel H13 by means of cadmium ion implantation and deposition. – Surface and Coatings Technology 204 (2010) 2981–2985.
248. A. de la Piedad-Beneitez, R. Valencia-Alvarado, R. Lopez-Callejas, I.A. Rojas-Olmedo, R. Pena-Eguiluz, A. Mercado-Cabrera, S.R. Barocio, A.E. Munoz-Castro, B.G. Rodriguez-Mendez. Optimized AISI-304 steel nitriding in inductive RF N2–H2 plasmas. – Vacuum 85 (2011) 1149–1151.
249. G.M. La Vecchia, N. Lecis. Impact test and tribological behaviour of duplex-treated low-alloy steel. – Surface and Coatings Technology 205 (2010) 614–619.
250. M. Ueda, G.F. Gomes, L.A. Berni, J.O. Rossi, J.J. Barroso, A.F. Beloto, E. Abramof, H. Reuther. Plasma immersion ion implantation using a glow discharge source with controlled plasma potential. – Nuclear Instruments and Methods in Physics Research B 161–163 (2000) 1064–1068.
251. Akio Nishimoto, Atsushi Tokuda and Katsuya Akamatsu. Effect of Through Cage on Active Screen Plasma Nitriding Properties. – Materials Transactions 50(5) (2009) 1169.
252. T. Czerwiec, H. Michel, E. Bergmann. Low-pressure, high-density plasma nitriding: mechanisms, technology and results. – Surface and Coatings Technology 108–109 (1998) 182–190.
253. J.N. Feugeas, B.J. Gomez, L. Nachez, J. Lesage. Steel surface treatment by a dual process of ion nitriding and thermal shock. – Thin Solid Films 424 (2003) 125–129.
254. L.A. Berni, M. Ueda, G. F. Gomes, A. F. Beloto and H. Reuther. Experimental results of a dc glow discharge source with controlled plasma floating potential for plasma immersion ion implantation. – J. Phys. D: Appl. Phys. 33 (2000) 1592–1595.
255. C. E. Pinedo, W. A. Monteiro. Surface hardening by plasma nitriding on high chromium alloy steel. – J. Materials Science Letters 20 (2001) 147–149.
256. V.I. Dimitrov, J. D'Haen, G. Knuyt, C. Quaeyhaegens, L.M. Stals. Modeling of nitride layer formation during plasma nitriding of iron. – Computational Materials Science 15 (1999) 22–34.
257. Enrique Camps, Fernando Becerril, Stephen Muhl, O. Alvarez-Fregoso, M. Villagran. Microwave plasma characteristics in steel nitriding process. – Thin Solid Films 373 (2000) 293–298.
258. M. Bacal, J.P. Peyre. Nitriding with ion beam from Hall-type source. – Applied Surface Science 138–139 (1999) 155–158.
259. N.G. Shang, Z.F. Zhou, C.S. Lee, I. Bello, S.T. Lee. Effect of ion beam nitriding on diamond nucleation and growth onto steel substrates. – Diamond and Related Materials 10 (2001) 1506–1510.
260. H. Ferkel, M. Glatzer, Y. Estrin, R.Z. Valiev. RF plasma nitriding of a severely deformed high alloyed steel. – Scripta Materialia 46 (2002) 623–628.
261. H. Ferkel, M. Glatzer, Y. Estrin, R.Z. Valiev, C. Blawert, B.L. Mordike. RF plasma nitriding of severely deformed iron-based alloys. – Materials Science and Engineering A 348 (2003) 100–110.
262. J. Michalski. D.C. glow discharge in a gas under lowered pressure in ion nitriding of Armco iron. – J. Materials Science Letters 19 (2000) 1411–1414.
263. Efim M. Oks, Alexey V. Vizir, and George Yu. Yushkov. Low-pressure hollow-cathode glow discharge plasma for broad beam gaseous ion source. – Rev. Sci. Instrum., 69(2) (1998) 853–855.
264. А.В. Белый, В.А. Кукареко, И.Ю. Тарасевич, С.К. Ших, И.В. Бояренко. Влияние плотности ионного тока на структурные параметры и свойства поверхностных слоев хромосодержащих сплавов железа, модифицированных ионами азота. – Физика и химия обработки материалов 2000, №4, с.11–17.
265. Будилов В.В., Агзамов Р.Д. Ионное азотирование поверхности конструкционных сталей и сплавов в тлеющем разряде на основе эффекта полого катода. – Proc. of 6th Intern. Conf. on Modif. of Mater. with Particle Beams and Plasma Flow. – Russia, Tomsk, 2002. p.428–431.
266. М.И. Гусева, Г.М. Гордеева, Ю.В. Мартыненко, М.В. Атаманов, В.Е. Неумоин, А.М. Смыслов. Имплантационно-плазменная обработка мартенситной стали и титанового сплава. – Физика и химия обработки материалов 1999, № 2, с. 11–16.
267. Андреев А.А., Саблев Л.П., Шулаев В.М. О роли атомарного азота при химико-термической обработке сталей в газовом вакуумно-дуговом разряде. – Сб. докл. Межд. конф. «Оборудование и технологии термической обработки металлов и сплавов», Харьков, ННЦ ХФТИ. 2005, ч. 1. c. 246–250.
268. П.М. Щанин, Н.Н. Коваль, И.М. Гончаренко, С.В. Григорьев. Азотирование конструкционных сталей в газовых разрядах низкого давления. – Физика и химия обработки материалов 2001, №3, с.16–19.
269. П.М. Щанин, Н.Н. Коваль, Ю.Х. Ахмадеев, СВ. Григорьев. Дуговой разряд с холодным полым катодом в скрещенных электрическом и магнитном полях. – Журнал технической физики, 2004, том 74, вып. 5, с.24–29.
270. П. М. Щанин, Н. Н. Коваль, Ю. X. Ахмадеев. Общая экспериментальная техника генерации газоразрядной плазмы в дуговом источнике с холодным полым катодом. – Приборы и техника эксперимента, 2005, №3, с. 62–66.
271. Д. П. Борисов, Н. Н. Коваль, П. М. Щанин. Генерация объемной плазмы дуговым разрядом с накаленным катодом. – Известия высших учебных заведений. Физика. 1994 №3, с.115–120.
272. Т.А. Панайоти. Создание максимальной насыщающей способности газовой среды при ионном азотировании сплавов. – Физика и химия обработки материалов 2003. №4, с. 70–78.
273. Mehmet Karakan, Akgun Alsaran, Ayhan Celik. Effects of various gas mixtures on plasma nitriding behavior of AISI-5140 steel. – Materials Characterization 49 (2003) 241–246.
274. M.A. Pessin, M.D. Tier, T.R. Strohaecker, A. Bloyce, Y. Sun and T. Bell. The effects of plasma nitriding process parameters on the wear characteristics of AISI-M2 tool steel. – Tribology Letters 8 (2000) 223–228.
275. J.M. Priest, MJ. Baldwin, M.P. Fewell, S.C. Haydon, G.A. Collins, K.T. Short, J. Tendys. Low pressure h.p. nitriding of austenitic stainless steel in an industrial-style heat-treatment furnace. – Thin Solid Films 345 (1999) 113–118.
276. Wang Liang, Xu Xiaolei, Xu Jiujun, Shi Yaqin. Characteristics of low pressure plasma arc source ion nitrided layer on austenitic stainless steel at low temperature. – Thin Solid Films 391 (2001) 11–16.
277. А.В. Визирь, Е.М. Окс, П.М. Щанин, Г.Ю. Юшков. Несамостоятельный тлеющий разряд с полым катодом для широкоапертурных ионных источников. – Журнал технической физики, 1997, том 67, № 6, c.4–12.
278. A. V. Vizir, E. M. Oks, P. M. Shchanin, G. Yu. Yushkov. Non-self-sustained hollow-cathode glow discharge for large-aperture ion sources. – Tech. Phys. 42(6) (1997) 611–614.
279. A. V. Vizir, G. Yu. Yushkov, E. M. Oks. Further development of a gaseous ion source based on low-pressure hollow cathode glow. – Rev. Sci. Instrum., 71(2) (2000) 728–730.
280. E. Andrzejewska, R. Gonzalez-Arrabal, D. Borsa, D.O. Boerma. Study of the phases of iron–nitride with a stoichiometry near to FeN. – Nuclear Instruments and Methods in Physics Research B 249 (2006) 838–842.
281. O. Wang H.D., Xu B.S., Liu J.J., Zhuang D.M. The frictionereduction model of the iron sulfide film prepared by plasma source ion sulfuration. Surf. Coat. Technol. 2007; 201:5236–5239.
282. M.K. Lei, X.M. Zhu. In vitro corrosion resistance of plasma source ion nitrided austenitic stainless steels. – Biomaterials 22 (2001) 641–647.
283. Таблица соответствия марок нержавеющих сталей по ГОСТ, EN, UNS, SIS, BS, AISI, химсостав, механические свойства. http://www.dpva.info/Guide/GuideMatherials/Metalls/AlloysNamesCorrespondance/Ste...
284. Таблица соответствия нержавеющих сталей по EN, DIN, AISI, JIS и ГОСТ. h t t p : // www. dpva.info/Guide/GuideMatherials/Metalls/AlloysNamesCorrespondance/SteelsNamesCorrespondance21/
285. R. M. Oliveira, M. Ueda, B. Moreno, L. Hoshida, S. Oswald, and E. Abramof. A novel process for plasma immersion ion implantation and deposition with ions from vaporization of solid targets. – p hys. stat. sol. (c) 5(4) (2008) 893–896.
286. T. Moskalioviene, A. Galdikas, J.P. Riviere, L. Pichon. Modeling of nitrogen penetration in polycrystalline AISI-316L austenitic stainless steel during plasma nitriding. – Surface and Coatings Technology 205 (2011) 3301–3306.
287. J.P. Riviere, M. Cahoreau, P. Meheust. Chemical bonding of nitrogen in low energy high ??ux implanted austenitic stainless steel. – J. Appl. Phys. 91(10) (2002) 6361–6366.
288. И.Г.Марченко, И.И.Марченко, А.Г. Гугля, И.М. Неклюдов. Компьютерное моделирование ионного азотирования аустенитных сталей. – Физика и химия обработки материалов. 2005 №1, с.56–60.
289. http://www.hcei.tsc.ru/ru/cat/technologies/tech30.html
290. WangHai-dou, MaGuo-zheng, XuBin-shi, SiHong-juan, YangDa-xiang. Microstructure and vacuum tribological properties of 1Cr18Ni9Ti steel with combined surface treatments. – Surface & Coatings Technology 205 (2011) 3546–3552.
291. А.А. Андреев. Вакуумно-дуговое модифицирование поверхности стальных изделий. – ФІП ФИП PSE, 5(3–4) (2007) 140–148.
292. A.C. Rovani, A.E. Crespi, V. Sonda, F. Cemin, F.G. Echeverrigaray, C.L.G. Amorim, R.L.O. Basso, I.J.R. Baumvol, C.A. Figueroa. Plasma post-oxidation mechanisms of nitrided ferrous alloys. – Surface & Coatings Technology 205 (2011) 3422–3428.
293. В. В. Будилов, К. Н. Рамазанов. Технология ионного азотирования деталей ГТД в тлеющем разряде с полым катодом. – Вестник УГАТУ. Машиностроение. Технология машиностроения. Уфа: УГАТУ, 2008. т.10, №1(26). с.82–86.
294. Y. Sun, Unlubricated sliding frictional behaviour of oxide films on plasma nitrocarburised steel. – Tribology International 40 (2007) 208–215.
295. Dmitry P. Borisov, Igor M. Goncharenko, Nikolay N. Koval, and Pete M. Schanin. Plasma-Assisted Deposition of a Three-Layer Structure by Vacuum and Gas Arcs. – IEEE TRANSACTIONS ON PLASMA SCIENCE 26(6) (1998) 1680–1684.
296. W.M. Silva, V.J. Trava-Airoldi, Y.W. Chung. Surface modification of 6150 steel substrates for the deposition of thick and adherent diamond-like carbon coatings. – Surface & Coatings Technology 205 (2011) 3703–3707.
297. A.C. Rovani, R.R. Fischer, F. Cemin, F.G. Echeverrigaray, R.L.O. Basso, C.L.G. Amorim, G.V. Soares, I.J.R. Baumvol and C.A. Figueroa. E??ect of hydrogen on plasma post-oxidation of ferrous alloys. – Scripta Materialia 62 (2010) 863–866.
298. Arvaidas Galdikas, Teresa Moskalioviene. Modeling of stress induced nitrogen diffusion in nitrided stainless steel. – Surface & Coatings Technology 205 (2011) 3742–3746.

MARC record